Por favor, use este identificador para citar o enlazar este ítem: https://repositorio.uti.edu.ec//handle/123456789/3211
Título : Management and Control of Occupational Risks in the Manufacture of Fuel and Oil Filter Caps
Autor : Ron-Valenzuela, Pablo
Topon-Visarrea, Blanca
Delgado, Miguel
Fecha de publicación : 2021
Editorial : Lecture Notes in Networks and Systems. Volume 262 LNNS, Pages 279 – 286. AHFE International Conferences on Safety Management and Human Factors, and Human Error, Reliability, Resilience, and Performance, 2021. Virtual, Online. 25 July 2021 through 29 July 2021
Resumen : In the process of manufacturing oil and fuel filter covers, mechanical risks have been identified such as: entrapment and crushing of hands with risk level I (not acceptable) and projection of fragments and particles with risk level II (Not acceptable or acceptable with specific control); For this, corrective measures were established at the source of risk by means of a spring system in each of the molds so that the filter cover after being pressed is expelled uniformly without the need for the operator to insert his hands in the danger zone. In the accident transmission medium, an adjustable safety guard and a mechanical guide element were implemented which allow the entry and exit of the covers. Finally, workers were provided with work gloves selected under international standards
URI : https://link.springer.com/chapter/10.1007/978-3-030-80288-2_34
http://repositorio.uti.edu.ec//handle/123456789/3211
Aparece en las colecciones: Artículos Científicos Indexados

Ficheros en este ítem:
No hay ficheros asociados a este ítem.


Este ítem está sujeto a una licencia Creative Commons Licencia Creative Commons Creative Commons